四肖八码期期准精选资料

National Branch

Healthy floor beautiful China

次施工拖车叉车碾压30年不起尘沙 1 time construction trailer forklift crushed for 30 years without dust

Position : 四肖八码期期准精选资料 > Floor Features > Emery Floor

金刚砂地坪类型

1. Ordinary type-Emery floor
金刚砂耐磨地坪图片

Emery floor is also known as emery wear-resistant floor. Emery floor is composed of certain graded mineral alloy aggregate, special cement, other admixtures and admixtures. It can be used after opening the bag. It is evenly spread on the surface of the concrete that is about to set, and processed by special means, so as to form a whole with the concrete floor, and has high-density and colored high-performance wear-resistant floor.

Emery floor (corundum wear-resistant floor) construction process:

The first step: when the screed is leveled, the aggregate is evenly spread on the screed;

Step two: corner reinforcement, ground smooth;

The third step: saw the concrete in the appropriate position, make expansion joints, and fill with the required joint filler;

Step 4: Apply with a transparent sealant roller, smooth it with an electric pad, wipe it off, collect it, and maintain it.

-------------------------------------------------- -------------------------------

2. Hardened type-Emery floor

The hardened corundum floor is called corundum hardened floor or concrete hardened floor. It is a new floor water material developed from imported technology from Germany. The concrete pores are blocked by pressure grinder to form a high-strength, high-hardness polycrystalline siliconized layer It can block the erosion of concrete by oxides in the air, inhibit the precipitation of calcium and magnesium ions in the concrete, and stabilize the internal molecular structure of the concrete.

金刚砂硬化地坪


金刚砂硬化地坪原理图

(硬化剂与渗透剂分别浸泡4h以上 ,让起砂地坪吸足吸透硬化材料) Qifeng floor hardening material is immersed for more than 8h (the hardener and penetrant are immersed for more than 4h , so that the sanding floor can absorb the hardened material and absorb the hardening material)

金刚砂耐磨地坪剖面图

Qi Feng Emery Hardened Floor Schematic

Qifeng Emery Wear-resistant Floor Permeability Principle Section



金刚砂耐磨地坪优势

1次处理 叉车拖车碾压30年不起尘砂


The technology used in the Qi Feng hardened floor originated from the German military airport run in World War II The military technology that Daozhuan ruled from dust was later transferred to civilian use. The hardness of the concrete hardened floor reaches 9 Mohs hardness.

齐峰金刚砂地坪经得起拖车辗压30年

The Qifeng floor is a permanent curing concrete, which creates a solid, impermeable and dense entity for the floor surface, which is safe, environmentally friendly, and has a permanent luster. You only need to wash the floor with fresh water every day, no waxing and maintenance, saving maintenance costs!


齐峰金刚砂耐磨地坪永久抗渗


健康环保引领地坪行业发展方向


The Deligu sealing hardener material used in Qifeng floor is non-toxic, odorless, non-combustible, and meets VOC environmental protection requirements.


金刚砂地坪使用的密封硬化剂

 

30 年无维修维护成本,让您永久远离起砂、起尘、痛苦,为企业节约经营成本,帮企业省钱! Qifeng emery hardened floor is your best choice. One emery wear-resistant floor construction is permanent and effective. There is no maintenance and maintenance cost for 30 years, which will keep you away from sand, dust and pain forever. Business saves money!







金刚砂耐磨地坪案例




武汉人和保健品工厂金刚砂硬化地坪

东龙电子科技有限公司厂房耐磨地坪

◆ Corundum hardened floor of Wuhan Renhe Health Products Factory ◆ Donglong Electronic Technology Co., Ltd.
The factory of Wuhan Renhe Health Products is mainly used for warehouse use. The floor of the factory requires impermeability, not sand and impermeability ... More Wuhan Donglong Electronic Technology Co., Ltd. is a company that manufactures auto parts. The workshop requires dust and wear resistance ... More





金刚砂耐磨地坪施工工艺

Emery floor process

金刚砂地坪 Cushion treatment → Rebar bundling → Concrete pouring and screeding at the same time (simultaneous emery mixing) → Plastering on the smooth surface → First spraying of emery mix and smoothing and polishing → Second application of emery mix and smoothing , Polishing → surface modification and maintenance → emery floor

Emery wear-resistant floor

成干时,铺撒骨料,力求铺撒均匀,撒料分两次进行,且保证用量; When the grass root is 5-6 % dry before the initial setting, spread the aggregate, and strive to spread evenly, spread the material in two times, and ensure the dosage;

,用磨光圆盘压实搓毛; 1. Spread 2/3 of the total amount for the first time, and compact the wool with a polishing disc;

,用抹光圆盘压实搓毛; 2. Spread 1/3 of the total amount for the second time, and compact the wool with a polishing disc;

3. After the initial setting, wipe it off with a calender;

4. Check the flatness of the material after spreading, make timely adjustments to the low-lying areas, and then compact the hairs and polish them;

5. Before completion, use a trowel for polishing treatment to complete the process.

起砂金刚砂地坪工艺
Process of sanding corundum floor

金刚砂硬化地坪 Clean the ground → Remove the damaged layer of sand → Grinding or repair → Gritting Qifeng penetrant → Closing capillary crystallization → Grinding Qifeng hardener → Polysilicone modified silicon carbide → Polishing Qifeng crystal surface agent → Corundum hardened floor

金刚砂耐磨地坪硬化结构图


Attentions for construction of abrasion-resistant corundum floor:

1. Thoroughly clean up the damaged surface: Analyze the ground damage. The floor grinder thoroughly cleans the empty drum or damaged layer and smoothes the foundation surface.

2. Partial repair without omissions: Fully inspect the ground without omission repairs to ensure the quality of sand removal from the cement floor.

3. Floor drying: Ensure that the penetrant and hardener are fully ground to the capillary pores of the concrete, which is conducive to the formation of the polysilicon layer.

):确保地坪起砂处理聚硅层深度。 4. Sufficient immersion time of penetrant and hardener ( more than 4 hours ): Ensure the depth of the polysilicon layer for floor sanding treatment.

5. Thoroughly clean the ground: no hardened material remains on the floor surface, which is good for the floor.

6. Sufficient amount of penetrant and hardener: to ensure the depth of the polysilicon layer on the floor.

金刚砂耐磨硬化地坪施工工艺

Emery hardened floor process

后→清洁地面→磨压齐峰渗透剂→封堵毛细孔结晶→磨压齐峰硬化剂→金刚砂聚硅改性→抛光齐峰晶面剂→ 金刚砂耐磨硬化地坪 After 28 days of carborundum floor maintenance → clean the ground → grinding Qifeng penetrant → plugging capillary crystallization → grinding Qifeng hardening agent → silicon carbide modified silicon → polishing Qifeng crystal surface agent → emery wear-resistant hardening floor

Requirements for concrete in hardened ground construction:

(至少是C20以上 )。 1. The intensity reaches above C25 (at least above C20 ).

. 2.Water-cement ratio is not higher than 0.4 .

,泵送混凝土塌落度应不大于12cm 。 3. The slump of the concrete mixed on site should be no more than 5cm , and the slump of the pumped concrete should be no more than 12cm .

。 4. For the secondary concrete floor, the thickness of the surface layer should not be less than 5cm .

)。 5. In order to achieve better results, Qi Feng recommends adding a reinforced mesh to the concrete (the diameter of the reinforcing bar should be> ∮16 ).

可以正常施工。 6. The formed concrete can be divided into blocks for unlimited time polysilicon treatment. The cycle is short, the construction is flexible, and the normal temperature can be used for construction when the ambient temperature is greater than 0 degrees .

金刚砂硬化地坪原理
1. Schematic decomposition of emery hardened floor

金刚砂耐磨地坪原理图分解

(1) After being used in the base layer, it reacts with the substances in the concrete

(2) Feeding crystals, plugging pores and forming silicide

(3) Grinding penetrant to form high polycrystalline silicide

(4) Complete penetration, siliconized modification, forming a dense whole

(5) Reinforcement to improve the wear resistance of concrete floors

Structure diagram of emery hardened floor

Structure chart of Qifeng emery hardened floor →

金刚砂硬化地坪结构图

Qifeng Emery Wear-resistant Floor Permeability Principle Section

金刚砂耐磨地坪剖面图

金刚砂耐磨硬化地坪施工

>>>>>> Comparison Picture of Emery Floor and Emery Hardened Floor
金刚砂耐磨地坪

Ordinary emery floor

Damaged Emery Ground

Emery hardened floor


>>>>>> Qifeng emery wear-resistant floor construction process

金刚砂硬化地坪施工为金刚砂耐磨地坪压渗材料

Ground surface

2. Grinding Qifeng penetrant

抛光金刚砂耐磨地坪

齐峰金刚砂硬化地坪

3.Polysilicon layer on polished floor surface

4. Qi Feng Emery Hardened Floor

The Qifeng floor uses strict and scientific construction technology to provide customers with a ground that can never be dust and sand-emery hardened floor, 30 years of dust-free emery wear-resistant floor.



Good teamwork, meet and exceed customer needs, provide customers with the best overall solution for emery hardened floor!

Qifeng floor service process

Serial number

Service Process

Service Content

Qi Feng participating departments

1

See the scene and communicate with customers

Check the condition of the floor and identify customer needs

Marketing and Engineering

2

Submit construction plan

Customize detailed construction process and pre-quote

Marketing department

3

Model construction

Determine the construction process with small samples as the acceptance standard

Engineering Department and Marketing Department

4

signing the contract

Standardize contract: quality standard, construction period, settlement, after sales

Contract department and marketing department

5

Engineering construction

Service in strict accordance with the construction process

Inspector of Engineering Department and Quality Control Department

6

Engineering acceptance

Comprehensive quality acceptance with small samples as acceptance criteria

Engineering Department and Marketing Department

7

After-sales maintenance

Fill in Qifeng after-sale warranty

Engineering Department and Marketing Department

齐峰地坪资质与资料

High-tech products must rely on high-quality service and efficient management team to get the perfect solution result! Qifeng Flooring adhering to the business philosophy of "achieving customers' gratitude and excellence", completely solves the problem of ash-resistant emery floor Distress of sand!




International product quality, domestic product price

的价格 30% cheaper than imported products of the same quality

 

地坪起砂处理 最佳解决方案! Qifeng emery hardened floor is the best solution for sand raising treatment in factory, warehouse and garage floor !


的服务价格 Qi Feng determines the most competitive service price for emery wear-resistant floors to customers according to the specific construction site, customer needs, and specific construction processes

The following is a comparison table of various types of floor performance on the market:

Item \ Product

Qifeng floor

Epoxy floor

Emery floor

Terrazzo floor

Durability

★★★★★

★★★

★★

Hardness (Mohs)

8-9

5-4

6-5

5-4

characteristic

Internal modification

Surface coverage

Surface treatment

Surface treatment

life

50 years

1-8 years

3-5 years

5-8 years

Environmental protection

it is good

general

it is good

it is good

maintenance

Maintenance-free

Often need to be patched

Need to be waxed often

Need to be waxed often

Advantage

Cost-effective

Beautiful

Low price

Simple construction

Scope of application

Various mechanical processing plants

Warehouses, roads, garages, etc.

Light Industrial Plant

Garage, home, etc.

General plant

Non-stressed

Ordinary ground, home, etc.

Maintenance costs

0 yuan / square / year

12 yuan / square / year

10 yuan / square / year

10 yuan / square / year


The price of emery hardened floor is based on the current status of the floor: such as the degree of damage, the number of projects, the customer's environment, and the final demand of the customer. Qi Feng provides customers with the best cost-effective corundum wear-resistant floor construction plan and formulates the most reasonable quotation! We can provide customers with free on-site sample construction. You recognize the value of the model, and we will make a detailed quotation plan!  

All employees of Qifeng Floor are in awe of every penny of the customers, and let the customers reap value!

Qifeng Flooring provides solutions for emery hardened flooring, emery wear-resistant flooring, and emery flooring for industrial, warehouse, factory, garage, factory, supermarket, parking lot, laboratory, logistics and other occasions. Never stop sanding and dusting, completely solve your sanding, dusting and dusting troubles!



成就客户感恩卓越 ”的企业经营理念,为客户提供金刚砂硬化地坪最优解决方案! Qifeng Floor strictly implements the ISO9000: 2008 comprehensive quality management system, and provides customers with the best solution for emery hardened floor based on the business philosophy of " achieve customer gratitude and excellence "!

1. Site coordination: The project manager actively maintains good communication with the relevant person-in-charge of the client to ensure that the construction conditions such as water source, power supply, and schedule on site are normal.

2. Staffing: According to the construction period and construction area, it is equipped with corresponding equipment and reasonable staffing.

3. Personnel management: The construction personnel obey the deployment and instructions of the project manager, and carry out the construction strictly in accordance with the process. Actively cooperate with Party A's requirements and abide by Party A's rules and regulations.

金刚砂耐磨地坪施工工具

金刚砂硬化地坪专用磨片



24-hour service phone 400-651-6027

Zhou Zhanggui 15202766330 Senior Floor Construction Technician

You call now and we will provide you with the following free services

01.Technical experts develop a hardened floor solution for you
02. Make a construction sample on site, you will witness the Qifeng hardened floor

Submit floor service intention
Contact: *
phone number: *
Email:  
Intention statement