四肖八码期期准精选资料

National Branch

Healthy floor beautiful China

次施工拖车叉车碾压30年不起尘沙 1 time construction trailer forklift crushed for 30 years without dust

Position: 四肖八码期期准精选资料 > Technical Support

Precautions for making concrete hardened floor in factory

Published: 2015/9/18 Author: Qi Feng Floor

武汉齐峰地坪公司

Concrete hardened floor is a kind of floor that can reach Mohs's level 9, this floor can be very suitable for all kinds of places with high requirements for floor hardness, so I think a lot of machinery factories, electronics factories and other factories Large vehicles often pass through the ground, and they can be used as concrete hardened floors. In this way, there is no need to worry about the ground being unable to withstand the rolling of the vehicle.


Wuhan Qifeng Flooring Company is a professional concrete hardening floor construction company. It has a huge team, more than 500 construction workers, and advanced flooring machines. It has been doing flooring for more than ten years. The floor can be used well for up to 30 years, and sand problems will not easily occur during use. At the same time, the floor can reach Mohs 9 hardness, which can withstand the rolling of the vehicle. Now I will introduce to you the experience of Wuhan Qifeng Flooring Company in making concrete hardened flooring.


混凝土硬化地坪


Matters needing attention for concrete hardening floor:

1. Floor drying: ensure that the penetrant and hardener are fully ground to the capillary pores of the concrete, which is conducive to the formation of the polysilicon layer.

2. Sufficient immersion time of penetrant and hardener (more than 4 hours): ensure the depth of the polysilicon layer.

3. Thoroughly clean the floor: no hardened material remains on the floor surface, which is good for the floor.

4, sufficient amount of penetrant and hardener: to ensure the depth of the polysilicon layer.


Requirements for concrete:

1. The intensity reaches above C25 (at least above C20).

2.Water-cement ratio is not higher than 0.4.

3. The slump of the concrete mixed on site should be no more than 5cm, and the slump of the pumped concrete should be no more than 12cm.

4. For the secondary concrete floor, the thickness of the surface layer should not be less than 5cm.

5. In order to achieve better results, Qifeng company recommends adding reinforced mesh in the concrete (rebar diameter should be> ∮16).

6. The formed concrete can be divided into blocks for unlimited time polysilicon treatment. The cycle is short, the construction is flexible, and the normal temperature can be used for construction when the ambient temperature is greater than 0 degrees.


,叉车辗压30年不起尘砂——齐峰地坪。 If you have questions about the above hardened floor , or want to learn more about hardened floor, please click the online customer service on the right, or call the Qifeng floor free hotline: 400-651-6027 , forklift rolling 30 Can not afford dust-Qifeng floor.


[Customer case]

沈阳万科朗润园地下车库地坪施工

◆ Shenyang Vanke Langrun Park underground garage floor construction

Vanke Langrun Garden is located in the core area of Shenyang City. Qifeng flooring is used to construct the underground garage flooring for them. Once construction, 30 years of durability, Qifeng underground garage flooring is resistant to pressure and abrasion ...

龙湖北城天街地下车库耐磨地坪

◆ Longhu Beicheng Tianjie Underground Garage Wear-resistant Floor

After the construction of the underground parking lot at Times Street in Longhu, Qifeng's partners also took over the wear-resistant floor of the underground garage in Beicheng Street, Longhu, which is resistant to dust and abrasion ...


[Recommended reading]

> How to do emery solidified floor

> Corundum floor construction technology

> What to pay attention to in the construction of warehouse solid floor

> How to solve the uneven sand on the workshop floor